How to build a persional computer

With this developing technological age,the computer is becoming popular for human's need. Most people want to have their own computer to serve their lives such as: informing all the current events in the world, supplying a source of entertainment with music and games, comunicating with other people by chatting,...However, not everyone can afford to buy a personal computer. So to make everything acceptable with the expense, here are some steps to build a pc effective but simple.
To build a basic pc, we just need to buy some necessary components. First, go to an electronic equipment supplying store. Then ensure we will get good brand equipments. That means these equipments will have proper manufacture support. If we want our computer to operate well, it is important to choose good equipment. So going to a reliable store will be a wise choice. And here are the components necessary to build a pc: a motherboard_one of the important harewares, a processor with cooling fan,RAM, a video card, a power supply, case, a hard drive and some screws. Now just concentrate on and begin to build our computer.
The process of assembling parts of a computer is easy with two important steps. The first step is installing some components in the hardware. First, add processor and RAM to the motherboard. Most processors now use a socket to connect to the motherboard, so we need to align marked corners of processor and socket. Because when processor is running emiting a lot of heat, processor always comes with its own fan to cool. Then we install RAM with firm pressure. Second, install the CPU. Remember doing this step slowly and carefully, a little carelessness can ruin everthing because CPU is the brain of the computer. There will be an obvious connector for the motherboard and small four pin connector give power to CPU. Third, install the power supply. Use screws to secure power supply. Line up the power supply for placement into the pc case. Fan faces outside and wires faces inside. Finally, line up motherboard with plate and line up the screw holes with case. The second step is installing some components inside the case. At first, install hard disk by using the brackets and slide hard disc into appropriation. Then we will need to connect the power supply to the hard disk by using supplied cable. After that, install the CD drive also by using supplied cable. Make sure the drive is aligned properly. Finally, just install optional AGP video card. Now everthing has been done exactly excepting checking the operation.
Test on the operating of the computer is an important work to do. Test all the system is a process to make sure our computer running well. Now ready to get the computer set up. First, press the big round button on the case to activate the computer. If the monitor of our computer shows on, it means we have just done the right way. Next, check the software and the CD driver by playing a CD. If the computer accepts and runs the CD, it means we have been sucessful.
All the things now have been done exactly. With these above simple steps, a perfect persional computer will be sure to serve us. This work not only helps us save money, but it also gives us more fun because we have built a pc ourselves. Now we just need to operating the computer and enjoy our product.